https://www.seppesgroup.com/high-speed-door.html

Maintenance Tips for rapid roller doors: Secrets to Extend Their Lifespan

1. Understanding the Basics of Industrial rapid door

Definition and Types: High-speed doors, also known as PVC Roll Up High Speed Door and Rapid roll doors Widely used in industrial, commercial, and other fields, they can be classified by drive method into electric, pneumatic, and other types.

Working Principle: Rapid doors are driven by a motor to achieve quick opening and closing, usually equipped with sensors to automatically detect the passage of people and objects.

Importance: Rapid roll-up door not only improve traffic efficiency but also effectively isolate dust, noise, and temperature differences, protecting the internal environment.

2. Proper Use of Speed door Operating Guidelines: Ensure that operators are familiar with the control panel and emergency stop button of the fast action doors to avoid violent switching.

Load Limitations: Understand the maximum weight and size limits of the fast roller shutter doors to avoid passing overweight or oversized objects.

Safety Precautions: When working near the high speed PVC roller doors, adhere to safety regulations to avoid being pinched by the door or moving parts.

3. Daily Cleaning and Maintenance

Tracks and Pulleys: Regularly clean dust and debris from the tracks, and check for wear or looseness in the pulleys.

Curtain Material: Choose appropriate cleaning agents and tools based on the curtain material (such as PVC, fabric, etc.) for cleaning.

Sensors and Control Systems: Keep the sensor surfaces clean, avoid obstruction or contamination, and regularly check if the control system is functioning properly.

Special Reminder: Maintenance methods may vary for different types of fast doors (such as cold storage high speed doors, explosion-proof doors, etc.), and the manufacturer's maintenance manual should be referenced.

4. Regular Inspection and Maintenance

Inspection Frequency: It is recommended to conduct a comprehensive inspection at least once a month, including key components such as tracks, pulleys, motors, and sensors.

Replacement of Worn Parts: Worn parts (such as pulleys, bearings, etc.) should be replaced in a timely manner to avoid causing larger failures.

Lubrication Maintenance: Regularly add lubricants to components such as tracks and pulleys to reduce friction and noise.